Our acrylic sealer is a U.V resistant interior & exterior system used on slate, slasto, vinyl, brick, cement, mortar and screeds and provides a more matt finish. If bought from us, it is the milky white liquid.

1. Area to be treated must be clean & dry
2. Use UNDILUTED
3. Do not apply in direct sunlight (if possible)
4. Apply to the surface using lambswool applicator (available from tile or hardware stores) or sponge
5. Apply using even strokes to avoid pooling & streaking
6. Apply second coat within 1 hr, or once touch dry
7. Allow 24 hours for full cure
8. Clean tools using water
9. Coverage: depends on the porosity of the substrate – guideline 1 litre/15m2/coat
10. A dull appearance may indicate that sealer may be required - in our experience this may occur after 24 months